
| Homebuilt Wind Turbine Explained Homebuilt पवन टरबाइन के बारे में बताया |
A wind vane aka weather vane is used to measure wind direction. एक पत्ता हवा उर्फ बादनुमा हवा की दिशा को मापने के लिए किया जाता है. The wind vane is attached to the controller and communicates the wind direction via a small sensor to the wind turbine controller. हवा फलक के नियंत्रक से जुड़ा हुआ है और हवा टरबाइन नियंत्रक करने के लिए एक छोटे से सेंसर के द्वारा हवा दिशा संचार. A wind vane is always positioned according to the direction of wind. एक पत्ता हवा हमेशा हवा की दिशा के अनुसार स्थिति है. A weather vane always positions itself according to the wind direction. एक बादनुमा हमेशा हवा की दिशा के अनुसार स्वयं को पदों. A wind vane can be notifying the wind direction to some attached instrument, like a wind turbine ,or it can be a standalone version that is read off by the naked eye. एक पत्ता हवा कुछ संलग्न लिखत करने के लिए, एक पवन टरबाइन की तरह हवा दिशा सूचित किया जा सकता है, या यह कि नग्न आंखों से दूर पढ़ा है एक स्वसंपूर्ण संस्करण किया जा सकता है.
In the case of when a weather vane is attached to a wind turbine, it notifies the controller about wind speed and direction. जब एक बादनुमा एक पवन टरबाइन से जुड़ा हुआ है के मामले में, यह हवा की गति और दिशा के बारे में नियंत्रक notifies. The controller in turn tells the yaw motor to turn the nacelle so that the rotor faces the wind. बारी में नियंत्रक ताकि रोटर हवा चेहरों को गुब्बारे का डला बारी के लिए रास्ते से हटना मोटर बताता है. The photo to the left shows an anemometer in combination with a wind vane. This type is called cup-anemometer. बाईं ओर की तस्वीर एक पत्ता हवा के साथ संयोजन में एक anemometer दर्शाता है. इस प्रकार कप भी कहा जाता है-anemometer.
The anemometer is what makes it possible for the wind vane to measure both wind speed and direction Anemometer comes from the word anemos and is Greek for wind. इस anemometer क्या के लिए हवा पत्ता Anemometer दोनों हवा की गति और दिशा को मापने के लिए यह संभव बनाता है शब्द anemos से आता है और हवा के लिए यूनानी है. Nowadays the anemometer is an electrical device that calculates the wind velocity but that hasn't always been the case, they used to be of the mechanical kind. आजकल के anemometer कि हवा वेग की गणना एक विद्युत उपकरण है, लेकिन है कि हमेशा इस मामले नहीं किया गया है, वे इस यांत्रिक तरह का हुआ करता था.
The first mechanical anemometer was invented in 1450 by a man named Leon Battista Alberti. It consisted of a disk that rotated by the force of the wind. पहली यांत्रिक anemometer 1450 में एक आदमी लियॉन Battista Alberti नाम के द्वारा आविष्कार किया था. ऐसा लगता है कि हवा के बल द्वारा घुमाया एक डिस्क की शामिल हैं. Later on an Englishman by the name of Robert Hooke re-invented the anemometer and is often mistakenly believed to be the inventor of this instrument. बाद में एक अंग्रेज पर रॉबर्ट Hooke पुनः के नाम से और anemometer का आविष्कार अक्सर गलती से इस यंत्र के आविष्कारक माना जाता है.
Anemometers can be divided in two classes, there are those that measure the velocity of the wind and there are those that measure the pressure of the wind. Anemometers दो वर्गों में, वहाँ उन है कि उपाय के हवा के वेग हैं और विभाजित किया जा सकता है वहाँ उन है कि उपाय के हवा के दबाव हैं. A high quality and modern anemometer will give information about both of these quantities. एक उच्च गुणवत्ता और आधुनिक anemometer इन दोनों मात्रा के बारे में जानकारी देंगे. Down below there is a list of anemometers that reaches the same goal by using different technologies. नीचे नीचे वहाँ anemometers की है कि विभिन्न तकनीकों का उपयोग करके एक ही लक्ष्य तक पहुँच एक सूची है.